Certificate Shall Be Awarded After the Successful Completion of the Training

==============================================

Course Introduction:

This course equips professionals with the knowledge and practical skills to design, install, and maintain fire alarm systems in compliance with NFPA 72 (National Fire Alarm and Signaling Code) and NFPA 101 (Life Safety Code). Participants will learn system design principles, installation practices, and maintenance requirements to ensure reliable fire detection and life safety.

Training Objectives:

• Understand NFPA 72 & NFPA 101 fire alarm system requirements.
• Design, install, and maintain compliant fire alarm systems.
• Evaluate alarm coverage and system functionality.
• Develop preventive maintenance schedules.
• Ensure occupant safety through proper detection and notification systems.

Training Outcomes:

Participants will be able to:

• Design NFPA-compliant fire alarm layouts.
• Verify installation standards and proper device placement.
• Perform testing and maintenance according to NFPA 72.
• Document system compliance and inspection reports.
• Reduce fire-related risks in facilities through reliable alarm systems.

Training Methods:

• Interactive Lectures
• Hands-on Demonstrations
• Case Studies
• Group Exercises
• Practical Testing Simulations

Training Modules:

Module 1: Introduction to Fire Alarm Systems

1. Overview of NFPA 72 — NFPA 72, 2022 Edition
2. Overview of NFPA 101 Life Safety Code — NFPA 101, Ch. 7
3. Fire Alarm System Components — NFPA 72, Ch. 10
4. Regulatory Requirements — NFPA 72, Ch. 1 & Annex A
5. Roles & Responsibilities in System Management — NFPA 72, Ch. 4

Module 2: System Design Principles

1. Detection Device Selection — NFPA 72, Ch. 17
2. Notification Appliance Planning — NFPA 72, Ch. 18
3. Control Panel Specifications — NFPA 72, Ch. 10-12
4. Wiring, Power, & Circuit Design — NFPA 72, Ch. 12
5. Integration with Sprinkler & Fire Protection Systems — NFPA 72, Ch. 21

Module 3: Installation Standards & Best Practices

1. Device Placement & Coverage Requirements — NFPA 72, Ch. 17-18
2. Wiring and Conduit Installation — NFPA 72, Ch. 12
3. Control Panel Installation Procedures — NFPA 72, Ch. 10
4. Compliance Verification During Installation — NFPA 72, Annex D
5. Common Installation Errors & Solutions — NFPA 72, Annex B

Module 4: Maintenance & Inspection Procedures

1. Routine Inspection of Devices — NFPA 72, Ch. 14
2. Functional Testing of Fire Alarm Systems — NFPA 72, Ch. 14
3. Battery & Power Source Maintenance — NFPA 72, Ch. 10, 14
4. Recordkeeping & Documentation — NFPA 72, Ch. 14, Annex C
5. Corrective Actions & Troubleshooting — NFPA 72, Ch. 14

Module 5: Fire Alarm System Testing

1. Acceptance Testing Procedures — NFPA 72, Ch. 10, 14
2. Functional Tests for Smoke & Heat Detectors — NFPA 72, Ch. 17-18
3. Notification Appliance Testing — NFPA 72, Ch. 18
4. Control Panel Verification — NFPA 72, Ch. 10-12
5. Test Documentation & Reporting — NFPA 72, Ch. 14, Annex C

Module 6: Integration with Fire Protection Systems

1. Sprinkler System Interfacing — NFPA 13, NFPA 72, Ch. 21
2. Standpipe System Integration — NFPA 14, NFPA 72
3. Fire Pump Alarm Connections — NFPA 20, NFPA 72
4. Emergency Communication Integration — NFPA 72, Ch. 21
5. System Coordination & Verification — NFPA 72, Ch. 21

Module 7: Emergency Evacuation Planning

1. Evacuation Route Design & Notification — NFPA 101, Ch. 7
2. Occupant Load & Egress Considerations — NFPA 101, Ch. 7
3. Assembly Point Planning — NFPA 101, Annex B
4. Evacuation Drill Procedures — NFPA 101, Ch. 7
5. Documentation & Feedback — NFPA 101, Ch. 7, Annex B

Module 8: Practical Exercises & Case Studies

1. Fire Alarm System Layout Verification — NFPA 72, Ch. 17-18
2. Hands-On Device Installation & Testing — NFPA 72, Ch. 10-14
3. Functional Testing Simulation — NFPA 72, Ch. 14
4. Integration with Sprinkler & Pump Systems — NFPA 13, NFPA 20, NFPA 72
5. Group Discussion & Lessons Learned — NFPA 72, NFPA 101

Who Should Attend:

• Fire Alarm Designers & Technicians
• Facility & Maintenance Managers
• Safety Officers & Consultants
• Compliance & QA Personnel
• Fire Safety Inspectors

Registration Fee:

• Online: BDT 3,500/- per person
• In-Person Classroom: BDT 4,000/- per person

Available Payment Modes:

Bkash (Personal): 01739-138399
Nagad (Personal): 01739-138399
DBBL Rocket (Personal): 01739-1383997

DBBL Nexus Pay-01:
Card Number: 0121 0845 8527
A/C Name: Mohammad Abdur Rahman

Bank Account Details:
A/C Name: MOHAMMAD ABDUR RAHMAN
A/C Number: 3001570018186
Routing Number: 090262087
Branch: Ibrahimpur
Bank: Dutch-Bangla Bank Ltd.

বিশেষ দ্রষ্টব্য:
বিকাশ/নগদে ২০% চার্জ প্রযোজ্য
(উদাহরণ: ১,০০০/- হলে পরিশোধযোগ্য = ১,০২০/-)

Conclusion:

This course empowers professionals to design, install, and maintain fire alarm systems according to NFPA 72 and NFPA 101 standards, ensuring reliable life safety and compliance. Participants gain hands-on skills and practical knowledge for real-world applications.